Qualitative Face-Fit Testing In Bolton
On Site Face Fit Testing In Bolton
If your company is based in Bolton and you require qualitative face-fit testing for your employees, we at Fire Coral Ltd can provide you with testing by a Fit2Fit accredited provider.
As part of your company health and safety remit, if you provide your staff with respiratory equipment (RPE) you require certification that they fit your staff correctly, are used in the correct manner, and maintained in line with legal requirements. The Health & Safety Executives (HSE) guidance note INDG 479 lays bare the need for face fit testing.
Face-fit testing is required, especially if your employees work in a dusty environment within Bolton. The COSHH (Control of Substances Hazardous to Health) Regulations state then when selecting RPE equipment, a face-fit test is a way of ensuring an adequate seal is achieved. Did you know over 50% of masks tested on those with no training failed a face fit test.
By following the guidance laid out in INDG 479 & HSG 53 with regards RPE, you are meeting the regulatory requirements expected of you.
Book Your Face Fit Testing Today
Give us a call to discuss face-fit testing your employees in Bolton
Qualitative Face Fit Testing Firm That Covers Bolton
All close fitting masks should be face fit tested on the wearer to demonstrate whether they work or not. The types of masks which would need face-fit testing include, disposable face masks (FFP3), half masks & full-face masks. Here at Fire Coral Ltd, we provide qualitative testing for workers in Bolton using half-face disposable or reusable masks only.
Bolton Face Fit Testing
A face fit test is a set of exercises simulating everyday movement to determine whether an adequate seal is maintained. There are 7 exercises which each staff member should complete, each lasting for 1 minute. If one of the exercises is failed, the whole test needs to be re-taken. We will test your staff in groups of nine in slots 1.5 hours apart to minimise downtime to yourselves.
On Site Face Fit Testing Companies That Cover Bolton
Normal working conditions should be simulated during the test, as mentioned in INDG 479. It is recommended that staff should be using dynamic movements such as walking, stepping and cycling on exercise machines.
If your staff in Bolton use RPE on a regular basis, and you would like to ensure they are fully trained in the wearing, fitting, and use of their respiratory equipment; Fire Coral Ltd can provide you with a tailored training package at a preferential rate.
About Bolton
Bolton is a town in Greater Manchester, in the North West of England. Close to the West Pennine Moors, it is 10 miles (16 km) north west of the city of Manchester. Bolton is surrounded by several smaller towns and villages which together form the Metropolitan Borough of Bolton, of which Bolton is the administrative centre. The town of Bolton has a population of 139,403, whilst the wider metropolitan borough has a population of 262,400. Historically a part of Lancashire, Bolton originated as a small settlement in the moorland known as Bolton le Moors. During the English Civil War the town was a Parliamentarian outpost in a staunchly Royalist region, and as a result Bolton was stormed by 3,000 Royalist troops led by Prince Rupert of the Rhine in 1644. In what became known as the Bolton Massacre, 1,600 residents were killed and 700 were taken prisoner. Noted as a former mill town, Bolton has been a production centre for textiles since Flemish weavers settled in the area during the 15th century, developing a wool and cotton weaving tradition. The urbanisation and development of Bolton largely coincided with the introduction of textile manufacture during the Industrial Revolution. It was a boomtown of the 19th century and at its zenith, in 1929, its 216 cotton mills and 26 bleaching and dying works made it one of the largest and most productive centres of cotton spinning in the world.
