Qualitative Face-Fit Testing In Stoke-On-Trent
On Site Face Fit Testing In Stoke-On-Trent
If your company is based in Stoke-On-Trent and you require qualitative face-fit testing for your employees, we at Fire Coral Ltd can provide you with testing by a Fit2Fit accredited provider.
As part of your company health and safety remit, if you provide your staff with respiratory equipment (RPE) you require certification that they fit your staff correctly, are used in the correct manner, and maintained in line with legal requirements. The Health & Safety Executives (HSE) guidance note INDG 479 lays bare the need for face fit testing.
Face-fit testing is required, especially if your employees work in a dusty environment within Stoke-On-Trent. The COSHH (Control of Substances Hazardous to Health) Regulations state then when selecting RPE equipment, a face-fit test is a way of ensuring an adequate seal is achieved. Did you know over 50% of masks tested on those with no training failed a face fit test.
By following the guidance laid out in INDG 479 & HSG 53 with regards RPE, you are meeting the regulatory requirements expected of you.
Book Your Face Fit Testing Today
Give us a call to discuss face-fit testing your employees in Stoke-On-Trent
Qualitative Face Fit Testing Firm That Covers Stoke-On-Trent
All close fitting masks should be face fit tested on the wearer to demonstrate whether they work or not. The types of masks which would need face-fit testing include, disposable face masks (FFP3), half masks & full-face masks. Here at Fire Coral Ltd, we provide qualitative testing for workers in Stoke-On-Trent using half-face disposable or reusable masks only.
Stoke-On-Trent Face Fit Testing
A face fit test is a set of exercises simulating everyday movement to determine whether an adequate seal is maintained. There are 7 exercises which each staff member should complete, each lasting for 1 minute. If one of the exercises is failed, the whole test needs to be re-taken. We will test your staff in groups of nine in slots 1.5 hours apart to minimise downtime to yourselves.
On Site Face Fit Testing Companies That Cover Stoke-On-Trent
Normal working conditions should be simulated during the test, as mentioned in INDG 479. It is recommended that staff should be using dynamic movements such as walking, stepping and cycling on exercise machines.
If your staff in Stoke-On-Trent use RPE on a regular basis, and you would like to ensure they are fully trained in the wearing, fitting, and use of their respiratory equipment; Fire Coral Ltd can provide you with a tailored training package at a preferential rate.
Stoke-on-Trent is a city in Staffordshire, England, which forms a linear conurbation almost 12 miles (19 km) long, with an area of 36 square miles (93 km2). Together with the Borough of Newcastle-under-Lyme Stoke forms The Potteries Urban Area. This, together with the rural Staffordshire Moorlands area, forms North Staffordshire, which in 2001, had a population of 457,165. The conurbation continues to be polycentric, having been formed by the federation of six originally separate towns and numerous villages in the early-20th century. The settlement from which the federated town (not a city until 1925) took its name was Stoke-upon-Trent, because this was where the administration (and chief mainline railway station) was located. After the union, Hanley emerged as the primary commercial centre in the city, despite the efforts of its rival, Burslem. The three other component towns are Tunstall, Longton, and Fenton. Stoke-on-Trent is considered to be the home of the pottery industry in England and is commonly known as The Potteries. Formerly a primarily industrial conurbation, it is now a centre for service industries and distribution centres.